Загрузка...
Home Products Filtering elements For gases ECOPLAST-FEP-F

Depth Filter Elements ECOPLAST-FEP-F based on polytetrafluoroethylene (Brands of fluoroplast-4)

Technical mark EFP-110-G

Filter elements Ecoplast-FEP-F are designed for fine and sterile cleaning of compressed air, carbon dioxide, water vapor, corrosive gases (including Cl, NH, etc.). Operating  temperature -40 to + 150°C

Construction and materials

The element is made entirely of polytetrafluoroethylene (grade F-4, GOST 10007-80) without any additives and fillers. The element is a single layer porous hollow cylinder with the following geometric dimensions:

  • External diameter - 152 mm Internal diameter - 130 mm, the height - 205 mm;
  • External diameter - 116 mm, internal diameter - 94 mm, the height - 205 mm;
  • External diameter - 75 mm, internal diameter - 49 mm, the height - 220 mm.

Rating of filtration element depends on the polytetrafluoroethylene powder dispersion  Thermal bonding occurs during sintering the product in the mold.

Setting element in the filter housing is carried out by sealing the ends.

By agreement with the customer can be manufactured filter elements with different dimensions.

General Information

Filter elements made from a unique hydrophobic polytetrafluoroethylene are indispensable for filtering gases containing the aerosol particles of water. Water drops whose size exceeds filtration rating accumulate   on the outer surface of the elements become larger and goes to drain

Maximum thermochemical resistance makes it possible to use elements Ecoplast-FEP-F for the filtration of aggressive and highly aggressive gases, at temperatures from -40 to + 160°C.

The elements used for filtering steam (at a temperature of up to + 160°C). The ability of elements Ecoplast-FEP-F accept any methods of sanitary-chemical treatment, sterilization and regeneration and provide a long service life due to the possibility of chemical recovery.

High mechanical strength to withstand high pressure differences in the forward and backward direction, significantly increases the service life of the elements by washing with hot water or air or steam stripping in a direction opposite to the direction of filtration, which is especially important for the insoluble impurities.

Filter elements made from a unique hydrophobic polytetrafluoroethylene are indispensable for filtering gases containing the aerosol particles of water. Water drops whose size exceeds filtration rating accumulate   on the outer surface of the elements become larger and goes to drain

Technical characteristics of the filters height of 205 мм

Filtration rating, micron

5.0; 10; 20

Flux through the air (t = +20°C)

At least 30 m³ / (h kPa)

Operating temperature range, °С

from -40 to +150°С

The maximum pressure drop in the forward and backward direction

0.4 MPa at +20°С,

0.2 MPa at +150°С,

pH range

1÷14

Regeneration

Flushing reverse current of hot clean water, cleaning solutions or filtrate. Stripping the purified gas or vapor.

Aerodynamic characteristics of filtering elements with a height of 205 mm EFP-110-G / ... 152/130 with different filtration ratings (t = 200°С)

Certification

• Declaration of Conformity of the TR CU "On safety of machinery and equipment"

Example order: (filter element Ecoplast-FEP-F with a rating of 5 micron height of 205 mm)

Marking

EFP

110

G/5

205

152/130

Element filter cartridge

Material Code: depth of PTFE-4

Numerator: G (gas-gas)

Denominator: Filtration rating, mkm

Height of the working part of the element, mm

Outer and inner diameter of the element, mm