Загрузка...
Home Products Filtering elements For gases ECOPLEN-PE-G

FILTER ELEMENTS ECOPLEN-PE-G

Grade EFP-401-G based on a porous film

Ecoplen-PE-G

From ultra-high molecular weight polyethylene

The ECOPLEN-PE-G filter elements are designed to remove particles larger than 5 μm from gaseous media at temperatures up to + 100 ° C. The primary application is the preliminary and final filtration of a wide range of weakly and highly aggressive gases in various industries.

General information

The high thermochemical resistance of ultrahigh molecular weight polyethylene (UHMWPE), similar to the polytetrafluoroethylene resistance, allows the use of the ECOPLEN-PE-G elements to filter almost all gaseous media in the pH range from 1 to 14 at normal and elevated temperatures.

The absence of drainage materials ensures the purity of the filter material and ensures that no release are present in the filtrate. The relatively high filter surface area and high permeability allow to use this filters for filtration of large flux of gases.

The high mechanical strength of the ECOPLEN-PE-G elements allows filtration at high pressure drops as well as washing, blowing and washing with hot water in the direction opposite to the direction of filtration.

Design and technical characteristics of filter elements

 

TECHNICAL BRANCH

EFP-401-G

EFP-601-G

CONSTRUCTION FEATURES

Composition of the filter package

One porous UHMWPE film with one profiled surface providing drainage

Characteristic of the filter material

A 1 mm thick porous film made by sintering powders of ultra-high molecular weight polyethylene (UHMWPE) with different dispersitivity. It has filtration ratings of 2, 5, 10 μm.

Geometry of the filter package

Pleated filter package

filter bag

 

Filtering area, m2

0,3 (For the element with a height of 250 mm)

0,05

(For the element with a height of 250 mm)

 

Perforated frames

External and internal casting frames made of polypropylene (PP)

One internal casting frame made of PP, reinforced with a twisted frame from the SS

SPECIFICATIONS

End pieces

Both molded PP

Operating temperature range, °С

From -40 to +100

Maximum direct pressure drop, MPa

0,6 at  +40°С

0,2 at +100°С

Maximum reverse differential pressure, MPa

0,6 at  +40°С

0,2 at +100°С

 

 

Certification

• Certificate of registration Roszdravnadzor (Ministry of Health)

• Declaration of Conformity TR CU "On safety of machinery and equipment"

• Expert conclusion of the Rospotrebnadzor

• Conclusion on toxicological, sanitary-chemical and biological tests

• ISO 9001-2011 (ISO 9001:2008)

Example order (Filter element ECOPLEN-PE-G with a rating of 5 μm height of 250 mm)

MARKING

EFP

401

G/5

250

А7

S

 

Material code: pleated porous

film from UHMWPE

Numerator:

G  (gas)

Denominator:

Filter rating, μm

Height of the working part of the element, mm

 Adapter code:

A0; A7; F0; F1

Sealing

material

S; E