Загрузка...
Home Products Filtering elements For gases ECOPOR-F-G-M

PLEATED FILTRATION ELEMENTS ECOPOR-F-G-M

Brand EFP-525-G based on Membranes of polytetrafluoroethylene

 

Filtering elements ECOPOR-F-G are designed to remove bacteria and other particles larger than 0.2 μm from gaseous media at temperatures from -5 to +100 ° C.

Primarily used for filtration of compressed gases, including aggressive gases, and also as respiratory filters on tanks.

 

Construction and materials

The filter material is a hydrophobic porous membrane made of polytetrafluoroethylene (PTFE).

 

The filter material in the form of a hollow cylindrical corrugated package with a height of 250 mm is placed  between the outer and inner perforated frames made of polypropylene.

 

Elements of height 500, 750 or 1000 mm are obtained by welding 2, 3 or 4 elements with a height of 250 mm through the transition parts. Elements of any height can be manufactured both in a deadlock and in the passageway. The end and transition parts, outer and inner perforated frames of the elements are made of monolithic polypropylene and hermetically welded to the ends of the corrugated package

The particle retention efficiency is not less than 99.9996% with the recommended gas flow rate.

 

General information

The hydrophobicity of the material ensures effective removal of aerosol moisture.

The high porosity of the PTFE membrane ensures low resistance and high efficiency of the ECOPOR-F elements.

A large filtration area provides a high service life.

he high thermo chemical resistance of PTFE allows the use of ECOPOR-F elements to filter a wide range of gases at normal and elevated temperatures, and also conduct chemical regeneration.

 

Technical characteristics of elements with a height of 250 mm

 

Filter rating, μm

0,2

Recommended gas flow rate, m³/h

Up to 60

Filtering area, m2

0,7

Operating temperature range, °С

from -20 to +100

 

Maximum direct pressure drop, MPa

0.6 MPa at +20°С

0.2 MPa at +100°С

The minimum value of the bubble breakthrough point for a mixture of isopropanol and water in the ratio 70:30, MPa

 

0,105

Water Expansion Pressure (WIT), MPa

Not less than 0,32

Number of sterilization cycles with hot steam in the line at t = + 1420C for 30-45 minmmin

 

Not less than 100

Recommended Range pH

1÷14

 

Certification

• Certificate of registration Roszdravnadzor (Ministry of Health)

• Declaration of Conformity TR CU "On safety of machinery and equipment"

• Expert conclusion of the Rospotrebnadzor

• Conclusion on toxicological, sanitary-chemical and biological tests

• ISO 9001-2011 (ISO 9001:2008)

 

• Example order (Filter element ECOPOR-F-G with a rating of 0,2 μm height of 250 mm)

 

Marking

EFP

525

G/0,2

250

А7

М

S

 

Material Code: Hydrophobic membrane

From polytetrafluoroethylene

Numerator: G (gas-gas)

Denominator: Filter rating, μm

Height of the working part of the element, mm

 

Adapter code: :

A0; A7; F0; F1

 

M - medical (pharmacological) performance

 

Sealing material S; E