Home Products Filtering elements For liquids ECOPLEN-PE


Grade EFP-401 based on a porous film

From ultra-high molecular weight polyethylene

Ecoplen-PE filter elements are designed for preliminary and final cleaning of liquids including highly aggressive ones from solid mechanical particles more than 5 µm in the temperature range from - 20 to +100°С.

Construction and materials

The filtering material is a porous film 1-1.5 mm thick manufactured by sintering of UHMWPE powders of different dispersity. The thickness of the filtering film is 1-1.5 mm, what enables retaining of impurities both on the surface of the filtering layer and inside of it. The film has a shaped surface providing draining. As distinguished from other corrugated elements, these elements have no drain or other layers. High thermochemical resistance of UHMWPE, which is close to the one of PTFE, enables to use the elements for filtration of practically all liquid products in pH range from 1 to 14 at normal and high temperatures. The absence of drain materials ensures the purity of the filtering material and guarantees the absence of emissions to the filtrate.

General information

The high thermochemical resistance of ultrahigh molecular weight polyethylene (UHMWPE), approximate to the resistance of PTFE, allows the use of the ECOPLEN-PE elements to filter virtually all gaseous media in the pH range from 1 to 14 at normal and elevated temperatures.

The absence of drainage materials ensures the purity of the filter material and ensures that no precipitations are present in the medium to be filtered. The relatively large area of the filter surface and the high productivity of the elements make it possible to use them when filtering large flows of gases.

The high mechanical strength of the ECOPLEN-PE elements allows filtration at high pressure drops, as well as washing, blowing and washing with hot water in the direction opposite to the direction of filtration.

Design and technical characteristics of filter elements 





Composition of the filter package

One porous UHMWPE film with one profiled surface providing drainage

Characteristic of the filter material

A 1 mm thick porous film made by sintering powders of ultra-high molecular weight polyethylene (UHMWPE) with different dispersities. It has filtration ratings of 2, 5, 10 μm.

Geometry of the filter package

Pleated filter package

Filtering area, m2

0,3 (For an element with a height of 250 mm)

Perforated frames

External and internal casting frames made of polypropylene (PP)


End caps, core and cage

 Both molded PP

Operating temperature range, °C

 -40 ÷+100

Maximum direct pressure drop, MPa

0,6 at +40°С

0,2 at+100°С

Maximum reverse differential pressure, MPa

0,6 at +40°С

0,2 at +100°С


• Certificate of registration Roszdravnadzor (Ministry of Health)

• Declaration of Conformity TR CU "On safety of machinery and equipment"

• Expert conclusion of the Rospotrebnadzor

• Conclusion on toxicological, sanitary-chemical and biological tests

• ISO 9001-2011 (ISO 9001:2008)


• Example order (Filter element ECOPLEN-PE with a rating of 5 μm height of 250 mm)








Cartridge filter element

Material code: corrugated porous film of UHMWPE

Numerator: L (liqiud)

Denominator: Filter rating, μm

Height of the working part of the element, mm

Adapter code: A0; A7; F0; F1

Sealing material S; E