Filter elements Ecoplast-FEP-F are designed for fine and sterile cleaning of compressed air, carbon dioxide, water vapor, corrosive gases (including Cl, NH, etc.). Operating temperature -40 to + 150°C
The element is made entirely of polytetrafluoroethylene (grade F-4, GOST 10007-80) without any additives and fillers. The element is a single layer porous hollow cylinder with the following geometric dimensions:
Rating of filtration element depends on the polytetrafluoroethylene powder dispersion Thermal bonding occurs during sintering the product in the mold.
Setting element in the filter housing is carried out by sealing the ends.
By agreement with the customer can be manufactured filter elements with different dimensions.
Filter elements made from a unique hydrophobic polytetrafluoroethylene are indispensable for filtering gases containing the aerosol particles of water. Water drops whose size exceeds filtration rating accumulate on the outer surface of the elements become larger and goes to drain
Maximum thermochemical resistance makes it possible to use elements Ecoplast-FEP-F for the filtration of aggressive and highly aggressive gases, at temperatures from -40 to + 160°C.
The elements used for filtering steam (at a temperature of up to + 160°C). The ability of elements Ecoplast-FEP-F accept any methods of sanitary-chemical treatment, sterilization and regeneration and provide a long service life due to the possibility of chemical recovery.
High mechanical strength to withstand high pressure differences in the forward and backward direction, significantly increases the service life of the elements by washing with hot water or air or steam stripping in a direction opposite to the direction of filtration, which is especially important for the insoluble impurities.
Filter elements made from a unique hydrophobic polytetrafluoroethylene are indispensable for filtering gases containing the aerosol particles of water. Water drops whose size exceeds filtration rating accumulate on the outer surface of the elements become larger and goes to drain
Filtration rating, micron |
5.0; 10; 20 |
Flux through the air (t = +20°C) |
At least 30 m³ / (h kPa) |
Operating temperature range, °С |
from -40 to +150°С |
The maximum pressure drop in the forward and backward direction |
0.4 MPa at +20°С, 0.2 MPa at +150°С, |
pH range |
1÷14 |
Regeneration |
Flushing reverse current of hot clean water, cleaning solutions or filtrate. Stripping the purified gas or vapor. |
• Declaration of Conformity of the TR CU "On safety of machinery and equipment"
Marking |
|||||
EFP |
110 |
G/5 |
205 |
152/130 |
|
Element filter cartridge |
Material Code: depth of PTFE-4 |
Numerator: G (gas-gas) Denominator: Filtration rating, mkm |
Height of the working part of the element, mm |
Outer and inner diameter of the element, mm |