ECOPLEN-PE-G

Home Products Filter cartridges For gases ECOPLEN-PE-G

FILTER ELEMENTS ECOPLEN-PE-G

Grade EFP-401-G based on a porous film

From ultra-high molecular weight polyethylene

The ECOPLEN-PE-G filter elements are designed to remove particles larger than 5 μm from gaseous media at temperatures up to + 100 ° C. The primary application is the preliminary and final filtration of a wide range of weakly and highly aggressive gases in various industries.

General information

The high thermochemical resistance of ultrahigh molecular weight polyethylene (UHMWPE), similar to the polytetrafluoroethylene resistance, allows the use of the ECOPLEN-PE-G elements to filter almost all gaseous media in the pH range from 1 to 14 at normal and elevated temperatures.

The absence of drainage materials ensures the purity of the filter material and ensures that no release are present in the filtrate. The relatively high filter surface area and high permeability allow to use this filters for filtration of large flux of gases.

The high mechanical strength of the ECOPLEN-PE-G elements allows filtration at high pressure drops as well as washing, blowing and washing with hot water in the direction opposite to the direction of filtration.

Design and technical characteristics of filter elements

	TECHNICAL BRANCH	EFP-401-G		EFP-601-G
CONSTRUCTION FEATURES	Composition of the filter package	One porous UHMWPE film with one profiled surface providing drainage
	Characteristic of the filter material	A 1 mm thick porous film made by sintering powders of ultra-high molecular weight polyethylene (UHMWPE) with different dispersitivity. It has filtration ratings of 2, 5, 10 μm.
	Geometry of the filter package	Pleated filter package	filter bag
	Filtering area, m2	0,3 (For the element with a height of 250 mm)	0,05 (For the element with a height of 250 mm)
	Perforated frames	External and internal casting frames made of polypropylene (PP)	One internal casting frame made of PP, reinforced with a twisted frame from the SS
SPECIFICATIONS	End pieces	Both molded PP
	Operating temperature range, °С	From -40 to +100
	Maximum direct pressure drop, MPa	0,6 at  +40°С 0,2 at +100°С
	Maximum reverse differential pressure, MPa	0,6 at  +40°С 0,2 at +100°С

 

Certification

• Certificate of registration Roszdravnadzor (Ministry of Health)

• Declaration of Conformity TR CU "On safety of machinery and equipment"

• Expert conclusion of the Rospotrebnadzor

• Conclusion on toxicological, sanitary-chemical and biological tests

• ISO 9001-2011 (ISO 9001:2008)

Example order (Filter element ECOPLEN-PE-G with a rating of 5 μm height of 250 mm)

MARKING
EFP	401	G/5	250	А7	S
	Material code: pleated porous film from UHMWPE	Numerator: G  (gas) Denominator: Filter rating, μm	Height of the working part of the element, mm	Adapter code: A0; A7; F0; F1	Sealing material S; E