Home Products Filter housings Gas and vapour filter housings
Gas and vapour filter housings
Are designed for mounting of filtering elements from 125 to 1000 mm high.
Gas and vapour filter housings DFP-2ХХG (P) consist of a base having from 1 to 5 mounting seats for filtering elements and a cylindrical cap. The lower part of the housing has an elliptic bottom used as a condensate collector. A condensate drain fitting is welded to the bottom.
The single-cartridge housings are manufactured in two configurations. Type 1 is installed to the line cap up and has a special separate condensate collector (Photo 1). Type 2 is installed to the line cap down (Photo 2). In this case the filter housing cap is used as a condensate collector.
Vapour filter housings are manufactured with thermal protection.
The standard package of filter housings includes a manometer and a condensate drain tap. Upon additional request, a condensate extractor can be installed instead of the tap.
The package units are connected to the line with quick-release clamps Tri-Clamp or flanges.
Surface finish: inside — mechanical polishing with Ra< 0.8; outside — mechanical mirror polishing with Ra< 0.4.
SPECIFICATIONS OF FILTER
|
Holder brand |
The connection of the base/cap |
Line connection type |
Type of steel |
Number / Height of the element |
Element code |
Size |
Tmax.,оC |
Pmax, MPa |
Do, mm. |
Q in the air, m3/h * |
|
|
Height |
Width |
||||||||||
|
DFP-201G(Р)-125-А7-(06) |
Clamp BS |
Clamp BS (Tri-Clamp) |
AISI 304 (316L) |
1/125 |
А7 |
443 |
146 |
180 |
0,7 |
15 |
60 |
|
DFP-201G(Р)-250-А7-(06) |
Clamp BS |
Clamp BS (Tri-Clamp) |
AISI 304 (316L) |
1/250 |
А7 |
630 |
176 |
180 |
0,7 |
25 |
290 |
|
DFP-201G(Р)-500-А7-(06) |
Clamp BS |
Clamp BS (Tri-Clamp) |
AISI 304 (316L) |
1/500 |
А7 |
975 |
176 |
180 |
0,7 |
32 |
450 |
|
DFP-201G(Р)-250-А7-14(16) |
Coupling |
Flange |
AISI 304 (316L) |
1/250 |
А7 |
625 |
253 |
180 |
1,0 |
32 |
380 |
|
DFP-201G(Р)-500-А7-14 (16) |
Coupling |
Flange |
AISI 304 (316L) |
1/500 |
А7 |
875 |
253 |
180 |
1,0 |
50 |
780 |
|
DFP-201G(Р)-750-А7-14 (16) |
Coupling |
Flange |
AISI 304 (316L) |
1/750 |
А7 |
1125 |
253 |
180 |
1,0 |
50 |
1200 |
|
DFP-201G(Р)-500-А7-24 (26) |
Flange |
Flange |
AISI 304 (316L) |
1/500 |
А7 |
875 |
253 |
180 |
1,6 |
50 |
780 |
|
DFP-201G(Р)-750-А7-24 (26) |
Flange |
Flange |
AISI 304 (316L) |
1/750 |
А7 |
1125 |
253 |
180 |
1,6 |
50 |
1200 |
|
ДФП-205G(Р)-250 |
Flange |
Flange |
AISI 304 |
5/250 |
А0 |
1071 |
373 |
180 |
0,7 |
50 |
1500 |
* Q - the capacity is specified at an operating pressure of 0.7 MPa (g).)
MARKING
|
DFP- |
XYYG (Р) - |
500- |
А7- |
01 |
|
Product type Holder Filtering element Cartridge |
Digital designation of the filter holder material and design: X-material: 2-stainless steel; YY - number of seats for the element; G-application medium-gas, P-steam. |
Height of filter elements that can be installed in the holder, mm |
Adapter code for end part |
Modification, not specified for base models |
Example order DFP-201G-250-A7-14
Filter holder for gas, with coupling connection of the cap, stainless steel grade 12X18H10T, 1 seat for cartridge filter element up to 250 mm with adapter code A7, designed for a maximum pressure of 1.0 MPa.