Plants are designed for cleaning solid mechanical particles from highly polluted liquids, in a two-stage scheme in continuous mode, with periodic automatic regeneration of filters . Plants are designed for capacity 2.5, 6, 8 and 16 m3/hour.
Liquid is pumped to the inputs of parallel-running first-stage filters with cartridge filter elements made of stainless mesh. Two to four filters are working at the same time, while one is in regeneration, the rest – in work. After the filters of the first stage, the liquid is finally cleaned on the filter of the second stage, in which the cartridge filter elements are installed. The pressure at the entrance to the Plant, at the entrance to the second stage and at the exit from the Plant is controlled by electronic pressure sensors, the flow is controlled by an electronic flow meter and maintained at a predetermined level using a frequency regulator controlling the operation of the pump. During the work periodically, in the automatic mode the regeneration of the first stage filters is performed. The sediment is washed into the filter - trap, which, after drying, is rinsed with reverse flow of water into the sewer system. The processes of filling, washing and regeneration of filters are fully automated and take place without human intervention according to a specially developed algorithm implemented in the controller. Information about the basic parameters of the Plant is displayed on the controller display.
The unit is designed to clean highly polluted liquids from fine sediment prone to coagulation in continuous mode, with periodic automatic regeneration of filters.
The plants are designed for 2.5, 6, 8 and 16 m3/h of capacity.
Plant patterns for the "CASCADE-K" are similar to the settings of the "CASCADE-U", they differ in the algorithm of filter regeneration and the absence of a filter trap. The precipitate from the filter elements is washed off with water directly down the drain.
Name of indicators |
Cascade U-2-2,5 UV-2-2,5-2401 |
Cascade U-2-16 UV-2-16-2404 |
CASCADE-K-1/4-8 UV-1-8-2411 |
---|---|---|---|
Nominal water capacity, m3/h |
2.5 |
16 |
8 |
The concentration of solid mechanical particles, no more g/l |
0.02/0.3 |
|
|
% dry matter concentration |
|
7 |
|
Mode |
Automatic, continuous, with periodic regeneration of filters of the first stage. |
||
Number of first stage filters |
2 |
4 |
4 |
Material of the Plant flow |
Stainless steel 12X18H10T, GOST 19903-74 |
||
Nominal diameter of the main line, mm |
32 |
50 |
50 |
Total Plant height, not more, mm |
1650 |
1750 |
1750 |
Width, not more, mm |
850 |
880 |
880 |
Length, not more, mm |
2450 |
3500 |
2450 |
Weight, not more, kg |
150 |
350 |
200 |
max. Working pressure |
up to 6 atm. |
||
Power supply voltage |
3ph, 380V |