Home Products Filter housings Filter housings for gases
Designed for installation in them of the filter elements makes ECOPLAST-FEP and ECOSTEEL and are used to filter gaseous media from mechanical particles and aerosols.
Materials
The materials from which are manufactured filter housings: stainless steel 12X18H10T (GOST 5632-72).
Holders of filter elements for filtration of large volumes of gases of the DFP-201G brand consist of the basis in which there is a landing place with an end seal for installation of the filtering element, and the cylindrical case. The base has an elliptical bottom, which acts as a condensate collector. A condensate drain pipe is welded to the bottom.
The standard equipment of the filter holder includes a pressure gauge and a tap for draining condensate. Upon additional request, an automatic steam trap can be installed instead of the tap.
Connection of housing equipment to the line – flange.
Technical characteristics of filter holders
|
Holder brand |
The connection of the base/ cap |
Line connection type |
Type of filter element |
Number/ Height of the element |
Size |
Max. working temperature, °C |
Max. working pressure, MPa |
The nominal diameter. passage, mm |
|
|
Height |
Width |
||||||||
|
DFP 201G 200 150/80 |
flange |
flange |
ECOPLAST-FEP |
1/205 |
980 |
450 |
+180 |
1,6 |
80 |
|
DFP 201G 400 150/80 |
flange |
flange |
ECOPLAST-FEP |
2/205 |
1180 |
450 |
+180 |
1,6 |
80 |
|
DFP 600 150/80 |
flange |
flange |
ECOPLAST-FEP |
3/205 |
1380 |
450 |
+180 |
1,6 |
80 |
|
DFP 201G 250 150/80 |
flange |
flange |
ECOSTEEL |
1/250 |
1030 |
450 |
+180 |
1,6 |
80 |
|
DFP 201G 500 150/80 |
flange |
flange |
ECOSTEEL |
1/500 |
1280 |
450 |
+180 |
1,6 |
80 |
|
DFP 201G 750 150/80 |
flange |
flange |
ECOSTEEL |
1/750 |
1530 |
450 |
+180 |
1,6 |
80 |
MARKING
|
DFP- |
XYYG |
750- |
150/ |
80 |
|
Product type: cartridge filter element holder |
Digital designation of the filter holder material and design: X-material: 2-stainless steel. steel; YY - number of seats for the element; G-application environment-gas |
Height of filter element that can be installed in the holder, mm |
External diameter of the filter element, mm |
The diameter of the conditional passage of the inlet and outlet nozzles of the filter housing |
Certification
Declaration of Conformity TR CU "On safety of machinery and equipment"
Sample order DFP-201G-750 – 150/80
The filter holder for gas from stainless steel of the 12X18H10T brand on 1 landing place under a cartridge filter element with an external diameter of 150 mm and height of 750 mm of the ECOSTEEL brand. To the filter holder-80 mm.