Design and types of adapters for filtering elements

A0 – Dead-end element with flat plug and 44.5 mm footprint with two round o-rings
A7 – Dead-end element with a flat cap and a 56.5 mm footprint with a two-lobe bayonet lock and two round o-rings
AO₁ – Dead end element with tailplug and 44.5 mm footprint with two round o-rings
A7₁ – Dead-end element with a tail plug and a 56.5 mm seating with a two-lobe bayonet lock and two round o-rings
AO ₂ – Dead-end element with with a flap and 44.5 mm seat with two round o-rings
A7₂ – Dead-end element with a flap and 56.5 mm seat with a two-lobe bayonet lock and two round o-rings
F0 – Pass element with end details.
F1 – Pass elemenе with end parts flat rubber ring
R – Dead-end element with a flat cap and internal thread G3/4''
RR – Pass element with G3/4 female thread on both sides
R1 – Dead-end element with a flat cap and an external thread R1 ''

Designation of sealing material in the labeling of filter elements.

Code K	Mark	Common Name	Working environment temperature, °C	Description, Application
S	IRP-1401 NTA	Silicone	-50 to +250	Siloxane rubber. Food and slightly aggressive chemical fluids, air, ozone .
F	IRP-1225	Viton	-20 to +200	Fluoride rubber . Food and slightly aggressive chemical fluids.
E	PS-04	EPDM	-50 to +120	EPDM rubber. Water, neutral, slightly aggressive, food liquids.
N	52-469	–	-40 to +100	Nitrile rubber. Oil, gasoline, water, neutral, slightly aggressive, edible liquids.

End Adapter Matching